Sorry for the delay, for some reason this site didn’t update until now for me.
I re-soldered all the switches to be sure the solder had wicked all the way thru the board.
Nothing has changed:
Hold B3 and power up, normal startup, LCD = Time/date + Detecting USD, Connecting, NTP Syncing
Hold B2 and power up, normal startup, LCD = Time/date + Detecting USD, Connecting, NTP Syncing
Hold B1 and power up, LCD = Reset all? Yes on second line toggles to No with B3 press, back to Yes with B1 press. Nothing else happens, sticks on that same message until power cycled.