OpenSprinkler › Forums › OpenSprinkler Unified Firmware › Running OSPi Unified Firmware on RPi with no OSPi HW › Reply To: Running OSPi Unified Firmware on RPi with no OSPi HW
I am pretty sure that power source is OK, I also tried some other power source. I Noticed when it powers up during reboot, it’s trying to load I2C drivers, so I made the RPI image and then ran the “‘sudo raspi-config” script in order to Enable I2C in kernel, that help, because all RPi peripherals are Disable by default! I am not getting the frozen screen anymore , because of kernel I2C enabled. Now when I run the script sudo /etc/init.d/OpenSprinkler.sh restart, nothing happens, I looked at the file OpenSprinkler.sh in init.d directory and its empty very strange!!!
[email protected]:~$ ls -l /etc/init.d/OpenSprinkler.sh
-rwxr-xr-x 1 root root 0 Sep 1 01:38 /etc/init.d/OpenSprinkler.sh