OpenSprinkler Forums OpenSprinkler Unified Firmware Running OSPi Unified Firmware on RPi with no OSPi HW Reply To: Running OSPi Unified Firmware on RPi with no OSPi HW

#40077

akobari
Participant

I have already ping 192.168.2.26

C:\Documents and Settings\Ali>ping 192.168.2.26

Pinging 192.168.2.26 with 32 bytes of data:

Reply from 192.168.2.26: bytes=32 time<1ms TTL=64
Reply from 192.168.2.26: bytes=32 time<1ms TTL=64

pi@raspberrypi:~$ ifconfig
eth0 Link encap:Ethernet HWaddr b8:27:eb:50:e4:06
inet addr:192.168.2.26 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5316 (5.1 KiB) TX bytes:6244 (6.0 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1104 (1.0 KiB) TX bytes:1104 (1.0 KiB)

and I am using port 8080, if that’s correct,

http://192.168.2.26:8080/ nothing, i used both chrome and firefox