Darn. That Master Off Delay bug is not what I wanted to hear. I’ve a remote station, configured as a master, to switch on the borehole pump on whenever the main master switches on, which controls the tank pump. The tank empties quicker than the borehole can fill is, so I was hoping to add a master off delay to the remote master.
Besides the fact that the setting has no effect, I’d like to be able to have the master off delay to be as high as an hour, as the current 60 seconds isn’t going to help. Currently we manually control the borehole pump, but sometimes wake up in the middle of the night to an overflowing tank, when we’ve forgotten to turn if off.
I’ll have to go back to the drawing board. Maybe have the remote master trigger an Arduino which then adds the off delay?