I’ve rebooted the controller several times but no success. Prior to upgrading the firmware I was on the firmware that shipped with the OpenSprinkler 2.0, if that helps – much different UI. The new firmware seems a little buggy, like the controller isn’t quite powerful enough maybe – sometimes when I change settings they don’t save correctly the first time, and when I try to look at the logs it just spins but doesn’t pull anything up. The controller is connected to a network bridge, which connects to the rest of my network over WiFi. It picks up an IP address just fine, shows weather information on the home screen that is correct, gives me a green indicator that my API key is verified, etc. I don’t have a firewall or other setup that would block the controller off from the Internet.