OpenSprinkler › Forums › OpenSprinkler Unified Firmware › Low Flow Rate with Flow Meter › Reply To: Low Flow Rate with Flow Meter
February 19, 2018 at 11:37 am #49145
It should still work. The real-time flow rate is not going to be accurate any more, since it uses a 30 second window and that means there may not be a pulse reading within that window. But you can either change the window size to be a minute or more, or just ignore the real-time flow rate and only look at the logged flow data. You are right that the number of pulses that occurred in each program will be logged.