OpenSprinkler Forums OpenSprinkler Unified Firmware Flow Meter Logging Reply To: Flow Meter Logging



Also, it would be helpful to be able to store a flow rate threshold in each station config. Then, when a station run completes, OpenSprinkler could compare the current flow rate to the station flow threshold and send an event to IFTTT for email\text alerting.

Or if you don’t want to do the comparison in OpenSprinkler, just include the station flow rate threshold within the existing Station Run Event that can be sent to IFTTT. Then maybe IFTTT can be configured to do the comparison?

Here is what is currently sent to IFTTT for a Station Run Event and used for email alerts, so it already has the flow rate.

> From: Webhooks via IFTTT <[email protected]>
> To: User
> Date: October 15, 2017 at 1:39 PM
> Subject: “sprinkler”
> sprinkler
> October 15, 2017 at 01:39PM
> Station 01. Front Yard closed. It ran for 10 minutes 0 seconds.
> Flow rate: 6.51