good morning, thank you for the reply!
I’m using this relay board: https://www.ebay.com/itm/8-Ch-Relay-Network-IP-Relay-Web-Relay-Dual-Control-Ethernet-RJ45-interface-US/173093192868 It takes http commands in the following format: http://admin:[email protected]/relay_en.cgi?relayon2=on with no way (that I’ve found) in the firmware to disable authentication. I use the boards in conjunction with OpenHAB to handle contact closures and misc tasks around the property – they are rough around the edges but for the price not found a better solution.
I realize supporting such would require modification, as it would be a very simple one figured i’d ask. I can set up a translation script as you mentioned but if a more elegant solution could be added into the OSP codebase i’d be thrilled!