OpenSprinkler › Forums › OpenSprinkler Unified Firmware › First version of firmware 2.2.0 ready for testing › Reply To: First version of firmware 2.2.0 ready for testing
dotMorten
@Ray Thanks will do. It’s pretty much vanilla OS3 install (reset, set password, set location, then set zimmerman).
I did a bit of network tracing and the submit button is causing a “413 The request was too large”
Here’s the request that fails on submit:
http://192.168.1.21/co?pw=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&tyy=2022&tmm=11&tdd=24&thh=5&tmi=58&ttt=1671861536&tz=16&loc=34.04053%2C-117.18228&lg=1&mas=0&mton=0&mtof=0&mas2=0&mton2=0&mtof2=0&ext=0&sdt=0&uwt=1&wto=%22h%22%3A100%2C%22t%22%3A100%2C%22r%22%3A100%2C%22bh%22%3A30%2C%22bt%22%3A70%2C%22br%22%3A0%2C%22pws%22%3A%22%22%2C%22key%22%3A%22%22&wl=100&sn1o=1&fpr0=100&fpr1=0&sn1on=0&sn1of=0&sn2o=1&sn2on=0&sn2of=0&ifkey=&ife=0&dname=My+OpenSprinkler&dim=30&hp0=80&hp1=0&devid=0&ntp1=0&ntp2=0&ntp3=0&ntp4=0&ip1=192&ip2=168&ip3=1&ip4=21&gw1=192&gw2=168&gw3=1&gw4=1&subn1=255&subn2=255&subn3=255&subn4=0&dns1=192&dns2=168&dns3=1&dns4=31&dhcp=1&ntp=1&ipas=0&sar=0&sn1t=0&sn2t=0&_=1671861532470
It also happens with the “Monthly” setting. Manual, ETo and Auto Rain Delay all work fine.
I tried removing a lot some of the remaining parameters after the wto
parameter and that worked – well sort of – anything I don’t specify reverts to defaults. I found the same issue when trying to set the cloud key up as well.