OpenSprinkler Forums Hardware Questions OpenSprinkler OS PCB design Reply To: OS PCB design

#78541

kakas
Participant

I realized that I can export the libraries from the sch files. Checking them I see that the TX connector and the display connector is intentionally like that, the pins are not in one line. (So far I have seen SSD1206 with straight pin arrangement only.) The connector M04x02 pins will return to the normal position after updating the connector from the library.
An other observations: On the extender board there are DGND and GND lines, which are not interconnected in the schematics. I think they should be, as on the board they are interconnected. It confused the Eagle, so C2 has no GND connection (just hanging in the air) without airwire or warning. The GND line from RS to the GND pin should be thick conductor, as current of all loads (including the extension boards) are going through here.

Attachments: