All stations 1 -10 are ticked “Activate Master”….
Do you mean you can hear the master station solenoid open, or do you mean you can hear station 5 to 10 solenoid open?
Master Station clicks on 1-4 but not on 5-10, all station solenoids click ok. So my work around so far has been to leave the master station valve manually open and run the program and I get water on all stations.
Because you can open each station manually, the only thing I can think of is the ‘activate master’ flag is not turned on for stations 5 to 10. But you are pretty sure those flags are turned on already. I will check firmware 2.0.0 and see if I can reproduce this problem.
Master activate flag is DEFINITELY ON.