Today I again tried to install fw 2.1.0b in my hw 2.1 OS which has been running fw 2.0.9 successfully.
This time I used the updated app 1.2.2 to transfer the configuration from OS running 2.0.9 to OS 2.1.0b.
After the reflash the OS booted normally and quickly connected with an ip 192.168.1.65 as the pre-allocation in my router required. I then imported the configuration with app 1.2.2 and rebooted the OS to see what would happen.
This time the OS took a very long time to connect and had an ip 192.168.1.22 just like I was getting with app 1.2.1.
I include the config data from pre upgrade exported to email
{“programs”:{“nprogs”:5,”nboards”:2,”mnp”:53,”pd”:1,127,0,0,420,1439,1800,14,0],[1,127,0,0,420,1439,1800,16,0],[1,127,0,0,420,1439,2400,32,0],[1,127,0,0,420,1439,1800,64,0],[1,127,0,0,420,1439,3600,128,0},”stations”:{“snames”:[“Bore_Pump”,”Pond_Lawn”,”Mid_Lawn”,”Front_Lawn”,”House_Lawn”,”House_Trees”,”Pool_Trees”,”Shed_Lawn”,”S09″,”S10″,”S11″,”S12″,”S13″,”S14″,”S15″,”S16″],”masop”:[255,255],”ignore_rain”:[0,0],”act_relay”:[0,0],”maxlen”:16},”options”:{“fwv”:209,”tz”:86,”ntp”:1,”dhcp”:1,”ip1″:192,”ip2″:168,”ip3″:1,”ip4″:22,”gw1″:192,”gw2″:168,”gw3″:1,”gw4″:1,”hp0″:80,”hp1″:0,”ar”:0,”ext”:1,”seq”:1,”sdt”:0,”mas”:1,”mton”:1,”mtof”:-1,”urs”:0,”rso”:1,”wl”:100,”stt”:10,”ipas”:1,”devid”:0,”con”:110,”lit”:100,”dim”:5,”rlp”:0,”ntp1″:204,”ntp2″:9,”ntp3″:54,”ntp4″:119,”reset”:0,”dexp”:1,”mexp”:5},”status”:[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”settings”:{“devt”:1412071958,”nbrd”:2,”en”:1,”rd”:0,”rs”:0,”mm”:0,”rdst”:0,”loc”:”Coolalinga,”,”sbits”:[0,0,0],”ps”:0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0,”lrun”:[0,0,0,0],”rodur”:[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]}}
And post upgrade ie imported previous 2.0.9 config into 2.1.0b and then exported to email
{“programs”:{“nprogs”:5,”nboards”:2,”mnp”:14,”mnst”:4,”pnsize”:12,”pd”:1,127,0,[0,0,1439,0],[0,1800,1800,1800,0,0,0,0,0,0,0,0,0,0,0,0],”Program 1″],[1,127,0,[0,0,1439,0],[0,0,0,0,1800,0,0,0,0,0,0,0,0,0,0,0],”Program 2″],[1,127,0,[0,0,1439,0],[0,0,0,0,0,2400,0,0,0,0,0,0,0,0,0,0],”Program 3″],[1,127,0,[0,0,1439,0],[0,0,0,0,0,0,1800,0,0,0,0,0,0,0,0,0],”Program 4″],[1,127,0,[0,0,1439,0],[0,0,0,0,0,0,0,3600,0,0,0,0,0,0,0,0],”Program 5″},”stations”:{“snames”:[“Bore_Pump”,”Pond_Lawn”,”Mid_Lawn”,”Front_Lawn”,”House_Lawn”,”House_Trees”,”Pool_Trees”,”Shed_Lawn”,”S09″,”S10″,”S11″,”S12″,”S13″,”S14″,”S15″,”S16″],”masop”:[255,255],”ignore_rain”:[0,0],”act_relay”:[0,0],”stn_dis”:[0,0],”maxlen”:16},”options”:{“fwv”:210,”tz”:86,”ntp”:1,”dhcp”:0,”ip1″:192,”ip2″:168,”ip3″:1,”ip4″:22,”gw1″:192,”gw2″:168,”gw3″:1,”gw4″:1,”hp0″:80,”hp1″:0,”ar”:0,”ext”:1,”seq”:1,”sdt”:0,”mas”:1,”mton”:1,”mtof”:-1,”urs”:0,”rso”:1,”wl”:100,”den”:1,”ipas&quo t;:1,”devid”:0,”con”:110,”lit”:100,”dim”:5,”rlp”:0,”uwt”:0,”ntp1″:204,”ntp2″:9,”ntp3″:54,”ntp4″:119,”reset”:0,”dexp”:0,”mexp”:5},”status”:[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”settings”:{“devt”:1412078038,”nbrd”:2,”en”:1,”rd”:0,”rs”:0,”rdst”:0,”loc”:”Coolalinga,”,”wtkey”:””,”sunrise”:400,”sunset”:1106,”sbits”:[0,0,0],”ps”:0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,”lrun”:[0,0,0,0]}}
Hoping this will be helpful
Regards
John