@martinpihrt wrote:
Hello, I need advice.
I need to finish the good ospi software water pressure sensor, I do not know where place this rutine.
a) Annex is a flowchart of my problem (circuit)
c) screen home page and settingsVars held in the settings dict (gv.sd)
ups:0 Use Pressure sensor (0=no, 1=yes, o50)
tups:0 Type Pressure sensor (0=NC, 1=NO, o52)
pss:0 Pressure sensed (o53)
tpss:2 Time delay Master station ON to pressure sensed (0-10sec, o54)Thank you for advice on where to insert code…
I apologize for my English
http://www.pihrt.com/elektronika/248-moje-rapsberry-pi-zavlazovani-zahrady
Martin Pihrt
Thanks its OK:
http://pihrt.com/elektronika/248-moje-rapsberry-pi-zavlazovani-zahrady
#
pokud je povoleno mereni tlaku sepne master, bezi nejaky cas, musi byt tlak potom stanice
if gv.sd and gv.sd != 0 and not gv.sd: # pokud je povoleno mereni tlaku, je povolena master stanice a neni rucni rezim
if master_on: # master sepnul dle programu
if now-last_tlak_cas > gv.sd: # pokud ubehl cas do kdy musel byt tlak
if gv.sd: # je cidlo tlaku aktivni?
print "Cidlo tlaku je aktivni"
else:
print"Cidlo tlaku nesepnulo do nastavene doby, stop zalevani!"
master_on = False
stop_stations()
text_log = "Chyba zalevani - hlavni stanice sepla, ale do stanovene doby se neaktivoval snimac tlaku"
SMS_log_run(time.time(),text_log) # zapis do logu
#----odeslani chybove SMS, pokud je povoleno
if gv.sd: # je povoleno odesilani chybove SMS
if gv.sd: # je povoleno odeslat na tel. cislo 1
gv.sd = 0 # zakazeme v sms loop pouzivat modem
jsave(gv.sd, 'sd')
print "Odesilam stavovou SMS na telefon 1:",gv.sd, text_log
sms = text_log+'| gammu --sendsms TEXT '+gv.sd
cmd = '/bin/echo %s' % sms
print 'zpracovavam "%s"' % cmd
os.system(cmd)
gv.sd = 1 # povolime v sms loop pouzivat modem
jsave(gv.sd, 'sd')
if gv.sd: # je povoleno odesilani stavove SMS
gv.sd = 0 # zakazeme v sms loop pouzivat modem
jsave(gv.sd, 'sd')
print "Odesilam stavovou SMS na telefon 2:",gv.sd, text_log
sms = SMStext_log+'| gammu --sendsms TEXT '+gv.sd
cmd = '/bin/echo %s' % sms
print 'zpracovavam "%s"' % cmd
os.system(cmd)
gv.sd = 1 # povolime v sms loop pouzivat modem
jsave(gv.sd, 'sd')
if gv.sd: # pokud je povoleno zasilani emailu
text = text_log
priloha = ""
predmet = "Hlaseni o probehlem programu zalevani"
get_email(gv.sd,predmet,text,priloha) # odeslani emailu
last_tlak_cas = now
#