Runtime Not Updating | OpenSprinkler

Log In Register

This topic has 2 replies, 2 voices, and was last updated 7 years, 10 months ago by scott.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
June 12, 2016 at 12:27 pm #42964
scott
Participant
Hello

I have my OsPi configured with weather information, and it appears to be retrieving the data correct and updating the “Average Water” level for the day but for some reason the actual runtime is not changing. It’s stuck at about 5 mins per zone (see attached).

I’ve updated to the latest version of the Unified Firmware and that doesn’t seem to help. Weather diagnostics seems fine as well.

Any ideas?

Scott
Attachments:
June 12, 2016 at 12:51 pm #42972

Samer
Keymaster

Programs have a flag to use the weather percentage or not. Can you verify this is enabled or provide an export of your configuration. You can email it to support.

June 12, 2016 at 3:18 pm #42978

scott
Participant

Hey

Yep it is enabled. The run time should be ~10-13 mins at 100%, but for some reason it picked up a ~50% adjustment when I first turned on the system for the year and it won’t update.

I’ve sent the config to support

S.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.