Log In Register

OpenSprinkler › Forums › Hardware Questions › OpenSprinkler Pi (OSPi) › New to Sprinklers, veteran with Pi

  • This topic has 1 reply, 2 voices, and was last updated 8 years ago by Ray.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 2, 2018 at 9:44 am #51563

    PiDay
    Participant

    Hi all,

    was hoping to post a couple quick photos to see if there are an caveats to be aware of before doing an install. Looks like I can just plug-n-play, but my current transformer requires a ground. I’m not much of an electrician, so would I need to leave it there, or if I swap it for the recommended 24 VAC transformer, do I make sure they add the ground option… or do I not need the ground potentially with a different transformer?

    Thanks in advance!

    Attachments:

    1. Sprinklerbox.jpg

    2. transformer.jpg

    3. Sprinklerbox-1.jpg

    4. transformer-1.jpg

    August 17, 2018 at 8:41 pm #51778

    Ray
    Keymaster

    Did you mean the transformer requires a ground wire or it supplies a ground wire? If it has 3 wires, like 2 supply 24VAC, and the third is ground, then you can ignore the ground wire as OpenSprinkler does not need a ground wire.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

OpenSprinkler › Forums › Hardware Questions › OpenSprinkler Pi (OSPi) › New to Sprinklers, veteran with Pi