My phone, laptop, and the controller are all connected to the same home wifi network. I connected my phone to to the access point wifi on the controller os_xxxxx then I input the provided ip address on a internet browser and connected to the wifi network. The controller on the front screen says MC_____ with 4 bars of signal I don’t see any blinking dot.The ip address when I press b1 is different than the IP address provided in the directions. I pressed b1 and input that ip into the mobile app where is says open sprinkler ip and I input the default password opendoor in as well. It tells me check ip:port and try again. I put the ip address I find by pressing b1 in a internet browser either on my phone or laptop and it tells me cannot connect to page.