Ray, I’m currently running the July 12th firmware. I’m having trouble getting my OS back into WiFi mode to update the firmware. If I disconnect the W5500 and power up the controller, it gets stuck in a loop trying to boot from the Ethernet module (which isn’t connected). Pressing B3+B2 doesn’t bring up the menu to reset to AP mode. If I reboot with the Ethernet module connected, B3+B2 does bring up the option to reset to AP mode, but it immediately reboots into the hardwired connection. I’ve tried powering down after the B3+B2 reset and rebooting without the Ethernet module, but it goes back to the endless loop of trying to boot from hardwire. How do I get it to go back to WiFi mode so I can load the July 18 firmware file?