Reply To: OS_3.2 connector purpose

[HiltbrandHome]

I am waiting for my board and parts to arrive to build a new OS 3.2, but I’m trying to wrap my head around how I will need to program this. I have a USB to serial module, so is it just a matter of soldering wires to the board and connecting them to the USB to TTL module (aka – No resistors/capacitors required), and then flashing the firmware from the arduino IDE? Or can I just follow the instructions for using node-mcu flasher found here:

https://openthings.attachments.freshdesk.com/data/helpdesk/attachments/production/5097798708/original/os30_usb_flash_windows.txt?response-content-type=text%2Fplain&Expires=1652392625&Signature=ZcM9n53rJO5W-HvWqr7voa44nXDmk3WQpipTLNKuexFo4MW9Y9r3R4SYJjIu0H-chfq34jcsF3uJeUHnessFRDi6skr69hElAkik2mB2KoljJaRid3wOhxmzD93mNLxPFbtNrBEw895ydpNwMHC4RS5if~41Y019WweSSACw2-UJzyL8ITGP4HV7-AFJzAKEUygnSq~rgc4d4niCvSTiMtYRh5cnFTY0hf7aJ6G8Gr1mCYuLqYA5xjDBeurqke6TDNEbuETuxVy3LuIENnOP6xxxiqh4gJPSwDsaWydT-o6YCG3kblMWgilHCNiHaUZr7zO2gvlVoqW6-L6LaSO-qw__&Key-Pair-Id=APKAJ7JARUX3F6RQIXLA

connecting to the board using the usb to serial adapter? Thank you so much.

Edit: After studying the schematic, it looks like I can just use dupont connectors to connect to the JCON0 headers as well. Is that correct?