Search for: Log In Register OpenSprinkler › Forums › Hardware Questions › OpenSprinkler Pi (OSPi) › Raspberry pi 2 This topic has 5 replies, 5 voices, and was last updated 9 years, 11 months ago by Samer. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts February 4, 2015 at 4:28 am #35468 shivaParticipant Hi, should OSPi be compatible with Raspberry Pi 2? OSPi Standard or Plus version? Thanks February 4, 2015 at 8:28 am #35469 RayKeymaster It’s compatible with the Plus version. Thanks. February 4, 2015 at 11:28 am #35480 Dan in CAParticipant According to the Raspberry Pi web site, version 2 has “Complete compatibility with Raspberry Pi 1”. It also has the same form factor as the B+ So it should work just fine with the B+ version of the OSPi board but 6X faster. I wanted to order one but the usual sources are sold out. Dan February 6, 2015 at 5:07 am #35508 Rudolph TerblancheParticipant Faster ? Why ? Can understand on a media center. Have the V2 and the B+ in front of me. V2 will be wasted in this case on opensprinkler. February 6, 2015 at 3:45 pm #35513 Dan in CAParticipant I have always found the integrated web interface to be fairly slow. Of course I’m always reloading pages during development and testing. If you don’t access it very often or you are using the mobile app you probably wouldn’t notice. For me at least a faster response will be welcome and since the V2 costs the same as the B+ I wouldn’t call it a waste. Dan February 6, 2015 at 11:12 pm #35514 SamerKeymaster There’s also the issue of increased heat production with a higher clocked processor. Something to consider… Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In OpenSprinkler › Forums › Hardware Questions › OpenSprinkler Pi (OSPi) › Raspberry pi 2