Log In Register

OpenSprinkler › Forums › OpenSprinkler Mobile and Web App › Start Run-Once Program

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 1, 2020 at 8:33 am #66531

    meiland
    Participant

    In the user manuel: 6.Run-Once Program, …
    How can I start the test program. 1 minute each station ?
    Thanks a lot
    Frank

    June 30, 2020 at 4:54 am #67073

    meiland
    Participant

    Sorry, nobody knows?
    I would like to test all zones with 1 minute.
    There is no “Start” button. There is only “Save”. When I press “Save”, all sprinklers run at the same time.

    June 30, 2020 at 10:03 am #67079

    Ray
    Keymaster

    If you use buttons: press and hold B3 until the LCD displays “Run a Program, click B3 to list”. Then click B3, the first program you see (0. Test (1 min)) is the test program. Press and hold B3 to start it.

    If you use the mobile app / UI, click ‘Run-Once program’, then in the drop-down list, select ‘Test All Station’, then ‘Submit’.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

OpenSprinkler › Forums › OpenSprinkler Mobile and Web App › Start Run-Once Program