Log In Register

OpenSprinkler › Forums › OpenSprinkler Unified Firmware › Zimmerman Method – Cannot set Baseline

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 25, 2016 at 7:51 am #43904

    Stril
    Participant

    Hi!

    I am trying to use the Zimmerman-Method for watering.

    My problem is, that I cannot adjust the baseline. Opensprinkler 2.1.6 lets me change the sensitivity, but noch the baseline for the calculation.

    Can you help me?

    Regards,
    Stril

    August 25, 2016 at 10:34 am #43907

    Peter
    Participant

    Stril, the Zimmerman baseline functionality requires the latest version 2.1.6 (2) of the Firmware. The upgrade instructions are here if you have OpenSprinkler and here if you have OSPi. Let me know if any problems. Pete

    August 25, 2016 at 10:44 am #43908

    Stril
    Participant

    Hi!

    That was the trick!
    Thank you.

    I thought, the device would have arrived with the latest firmware.

    Regards,
    Stril

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

OpenSprinkler › Forums › OpenSprinkler Unified Firmware › Zimmerman Method – Cannot set Baseline