[i_have_a_name]

Hi,

I am using the UI on my PC running Windows 7.
Unfortunately the app on my Iphone does not work yet.

My set up is:
Station # 1 is the Master which is required to operate for each other station.

I am not trying to run a program. I am just trying to test a station using the “test station”
I have tried to test station#2, which has turned “red”.A few seconds later station #3 turnsed”red” as well. Only station #2 is phisically operated. Station # remains shut.
Similar things have happened to station#13 but this time the start button has remained green and station #14 has turned red. Only station #13 phisically is running the water.

Same random problems have happened to other stations.

I have been testing the stations for 1 min max. The logs show that some stations have been operated for 12 h or more. It looks like the long run stations are the ones which phisically were not opened. I will drop you an e-mail with the screen shots.

[i_have_a_name]

Hi,

Logs have a bug as well. It looks like it’s got something to do with the problem with testing the stations.

[i_have_a_name]

I have just updated the firmware and found a few bugs.

The start time in a program is not saved. You can set it up, then leave the program, go back and the start time is missing. It’s missing from the program preview too.

Then one more thing. In the stations edit, I have tried to test a station (for example #2). The “start” button has changed to a red “stop” one immediately and the water has been flowing. But a few seconds later the “start” buton for station #3 has turned red too. I have noticed that same thing happens randomly for other stations as well.

[Author]

Posts