Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 18, 2025 at 2:23 am in reply to: OpenSprinkler Firmware 2.2.1 #82305

    meiland
    Participant

    Yes, thanks, I was already using that version. The problem was probably that the distance between the device and the PC was too great? The manual says to access http://192.168.4.1/update in AP mode. That’s not entirely correct if the update has already been run. Unfortunately, no meaningful message is displayed. So, only 192.168.4.1 is required. Everything works now.

    June 30, 2020 at 4:54 am in reply to: Start Run-Once Program #67073

    meiland
    Participant

    Sorry, nobody knows?
    I would like to test all zones with 1 minute.
    There is no “Start” button. There is only “Save”. When I press “Save”, all sprinklers run at the same time.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)