[Midwood]

I just updated one of our OS units to the new firmware. The extra functions of the MQTT was what I was interested in, I now see the ‘on’ state of the master valve via MQTT, however it does not update on valve closing only on opening. I did read that duration was not going to show and that is fine. Early days I understand.
Thankyou for the update’s

[Midwood]

Yes, sorry I wasn’t clear. I am trying to use a master trigger to activate another device (lorawan). I basically need an MQTT event fired when the master is active. I could set a trigger from the stations linked to the master, but thought a mqtt from master directly is simplest.

[Midwood]

I’m another who just discovered this after a an hour or two of hair pulling. oh well. Could we get this implemented in the future release please? I’m trying to activate a long distance master valve via Lorawan after an MQTT trigger.
Thankyou

[Midwood]

A quick follow up to this issue.
Since running both stations on separate programs, I still get the same issue, when the1minute run turns off, it turns off both the 1 minute and the 4 hr run stations.
I have checked wiring twice, unchecked all sequential boxes. The odd thing is that the 4 hr program is still shown on the gui as running, which to me points towards a hardware issue??

Any input is appreciated here.
Thanks

[Author]

Posts