[phinnay]

Thanks!! While this is being reviewed would it be possible to expand the update to send HTTP PUT as well? It’d be neat to be able to call REST API’s on station trigger.

[phinnay]

good morning, thank you for the reply!

I’m using this relay board: https://www.ebay.com/itm/8-Ch-Relay-Network-IP-Relay-Web-Relay-Dual-Control-Ethernet-RJ45-interface-US/173093192868 It takes http commands in the following format: http://admin:[email protected]/relay_en.cgi?relayon2=on with no way (that I’ve found) in the firmware to disable authentication. I use the boards in conjunction with OpenHAB to handle contact closures and misc tasks around the property – they are rough around the edges but for the price not found a better solution.

I realize supporting such would require modification, as it would be a very simple one figured i’d ask. I can set up a translation script as you mentioned but if a more elegant solution could be added into the OSP codebase i’d be thrilled!

[phinnay]

Realize this is an old thread but I am up against the same issue – the relay board I am using requires basic authentication in the form of user:pass@<ip address> and I’ve been unable to make this work, as stated above.

Have there been any updates? Would it be possible to include such an ability in a future firmware? simply tacking a string on before the IP or changing how the IP field is parsed would satisfy the requirement.

Thanks!

[Author]

Posts