Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Announcing OpenSprinkler Unified Firmware 2.1.4 #38194

    shiva
    Participant

    I managed to change timezone exporting the configuration, modifying tz field in the json file and importing it.

    in reply to: Announcing OpenSprinkler Unified Firmware 2.1.4 #38191

    shiva
    Participant

    Thanks!
    That solved!
    Now it seems to work, but I still have some doubts.
    I’ve setup a nginx web server listening on port 80, OpenSprinkler sw is listening on 8080 (default on OSPi), set the script url to http://127.0.0.1/js so I’m able to open the login page on 192.168.1.88:80 and connect to the sprinkler 192.168.1.88:8080 (or launch the app and connect to 192.168.1.88:8080).
    Is it the right way?

    One final question: I’m not able to change the “-04:00” Timezone in “Edit options” -> System beacuse it is disabled, system clock and timezone are set ok, but this way OpenSprinkler shows a bad time, example:

    Current default time zone: ‘Europe/Rome’
    Local time is now: Thu Jun 4 12:14:24 CEST 2015.
    Universal Time is now: Thu Jun 4 10:14:24 UTC 2015.

    While on OpenSprinkler: Jun 04, 2015 06:14:24

    in reply to: Announcing OpenSprinkler Unified Firmware 2.1.4 #38156

    shiva
    Participant

    Hi,
    I’ve just upgraded ospi from the python program to this version and I have the problem that accessing through web it responds with blank pages on the base ip address (e.g. 192.168.1.88:8080) and with errors putting anything after it (e.g. 192.168.1.88:8080/main).
    The app also can’t connect.

    If it could be an useful information actually the raspberry is not connected to internet, it is acting as a wifi access point (with hostapd) and a dhcp server.
    I’ve only tested it accessing via the wifi network till now.
    With the same network configuration and the python program it was working.

    Any idea?

Viewing 3 posts - 1 through 3 (of 3 total)