Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 7, 2017 at 10:24 am in reply to: OSPi with LCD and push buttons? #47615

    stanoba
    Participant

    Yes, all three expanders should work as they are supported by RPLCD library. I have only cheap PCF8574T I2C LCD, so I’m glad that other boards will be tested.
    The small adapter should replace dupont cables in the future. I’m planning to rework this ospi enclosure and make holes for few types of LCDs.

    PS: Yes you right. Probably this is going to be permanent solution… 🙂

    September 6, 2017 at 3:51 pm in reply to: OSPi with LCD and push buttons? #47605

    stanoba
    Participant

    Hi guys, I have temporary workaround for this problem until somebody will do the full support. I’ve just finished python script which gets data from OpenSprinkler API and sends to I2C LCD. Both 16×2 and 20×4 I2C LCDs are supported. Script is executed via cron in one minute interval. Details can be found on GitHub: https://github.com/stanoba/ospiLCD.
    Is anybody willing to test it?

    OSPI I2C LCD

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)