Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • June 16, 2018 at 7:23 am in reply to: OS3 Reboots Randomly and eventually View logs fails and reboots. #50709

    szaky
    Participant

    Hi,

    Yes, program preview shows it as expected. And you are right, that rain detector is enabled. Rain detector is implemented by me, separate arduino using the VIN 5V of the Opensprinkler which closes the sensors pin with a relay in case it is raining. It seemed to work perfectly, but obviously there is a glitch. However there is no log about detecting the rain in the Opensprinkler. But when I disconnected the power from OS the program went through all the 4 stations.

    Maybe I shall use separate charger for my rain detector instead of stealing the 5V from OS, which might cause the problem.

    thx

    June 15, 2018 at 3:10 am in reply to: OS3 Reboots Randomly and eventually View logs fails and reboots. #50691

    szaky
    Participant

    Thanks Ray,

    I get it now. Having that checked, it seems that my Opensprinkler, did not reboot itself, but for some reason every morning it stops the station one, after unpredictable time (4min, 16min, 1min … ) without finishing the time set for that (20min) and without running the rest of the stations. I though it reboots itself, but it doesn’t.

    In case I execute the same program manually, it is fine. Any idea, why it is happening? Why it could happen?

    Asking before opening a ticket, maybe you have some idea.

    thanks

    June 12, 2018 at 3:39 am in reply to: OS3 Reboots Randomly and eventually View logs fails and reboots. #50630

    szaky
    Participant

    Hi Ray,

    is it possible to check the uptime of the system in any way?

    Thanks for your reply!

    June 1, 2018 at 5:00 pm in reply to: OS3 Reboots Randomly and eventually View logs fails and reboots. #50398

    szaky
    Participant

    Upgrade went well without any problem. 🙂 thx

    May 31, 2018 at 3:37 am in reply to: OS3 Reboots Randomly and eventually View logs fails and reboots. #50346

    szaky
    Participant

    Thanks Ray,

    For me exporting and importing the config worked fine, so if was finally an easy upgrade to 2.1.7. I am convinced to move to 2.1.8, hoping it will be smooth as well.

    Thanks for your feedback!

    May 28, 2018 at 2:42 am in reply to: OS3 Reboots Randomly and eventually View logs fails and reboots. #50257

    szaky
    Participant

    Ray, for those who are a bit less experienced in flash memory layout, is it worth upgrading, will it be more stable, or faster or? I am quite ok with the current release, and happy that the OTA upgrade went well. 🙂

    thx

    May 21, 2018 at 12:53 pm in reply to: OS3 Reboots Randomly and eventually View logs fails and reboots. #50123

    szaky
    Participant

    Reset solved the issue. Thanks for the reply.

    May 18, 2018 at 8:26 am in reply to: OS3 Reboots Randomly and eventually View logs fails and reboots. #50074

    szaky
    Participant

    Hi,

    I have updated the firmware over the air as described above with the attached bin file. Update was successful, but logging in to the controller results only a black screen both on web and in application too.

    any idea what went wrong?

    thx

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)