Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Valves Won't Turn Off #49696

    vik
    Participant

    Mike / Ray

    Thanks for the assistance – yes it appears switched mode power supplies output DC and that was the problem.

    I just connected up the power supply from RS and everything is working fine!

    Vik

    in reply to: Valves Won't Turn Off #49677

    vik
    Participant

    If I need to get another one, will this work?
    https://uk.rs-online.com/web/p/desktop-power-supply/9076249/

    in reply to: Valves Won't Turn Off #49676

    vik
    Participant

    Thanks for getting back to me.

    I bought a 24v Switched Mode AC DC Power Supply like this:

    https://www.ebay.co.uk/itm/18W-750mA-Fixed-Voltage-24V-Switched-Mode-AC-DC-Power-Supply/282416149933

    And then cut the plug off the end and wired it to the board.

    Looks like this is the culprit – should a switching power supply work – or should I get another one which is only AC?

    in reply to: Valves Won't Turn Off #49660

    vik
    Participant

    OK, I tested the voltage a few further ways:

    1. Voltage directly at the board

    Switches On, Switches Off, behaves as expected

    2. Voltage at the end of the cable

    Switches On,m Switches Off, behaves as expected

    3. Voltage at end of the cable with valve connected

    Switches On, won’t switch off, keeps supplying voltage at 23v until I shutdown the board.

    in reply to: Valves Won't Turn Off #49617

    vik
    Participant

    Yeah – good call – will go and test that.

    If I see the same voltage results then that would point to either the board or the software.

    in reply to: Valves Won't Turn Off #49606

    vik
    Participant

    OK, I checked the voltage.

    At first the voltage shows 0.

    When I start a station (for 1 minute) the voltage goes to 22.

    If I stop all stations the voltage stays at 22.

    The voltage stays at 22 until I restart the unit.

    Any idea what could be causing that to happen?

    in reply to: Valves Won't Turn Off #49594

    vik
    Participant

    Hi Mike,

    Thanks for coming back to me on this.

    The valves are these ones:
    http://www.access-irrigation.co.uk/shop/mist-propagation/propagation-controllers/solenoid-valve-24v-ac

    I have attached an image showing one of the valves wired up. The live (brown) wire goes to the 24v terminal on the valve and back to one of the switch ports on the OSPi

    The blue wire goes to the COM port on the OSPi.

    I’ll test the voltage later on today and update here (although when you switch off the OSPi, the valve also shuts off – so I imagine I will find that voltage is still being supplied)

    Vik

    Attachments:
Viewing 7 posts - 1 through 7 (of 7 total)