Log In Register

OpenSprinkler › Forums › Hardware Questions › OpenSprinkler Pi (OSPi) › Static IP and NTP settings

Tagged: ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 31, 2016 at 1:01 pm #41898

    artb
    Participant

    Hi: I am currently running Firmware Version 2.1.6(1) and App Version 1.49

    I just noticed that under the Advanced Settings the NTP, DHCP and Static settings options are no longer available. All I have is HTTP Port and Device settings.

    There is no longer any mention of these settings in the OSPi manual so is this now the standard for the app or is there something I need to do to update/fix the system. I’ve done the obvious things like rebooting the system etc.

    Thanks.

    April 1, 2016 at 1:52 pm #41908

    Miles
    Participant

    Since the os is most likely based on debian, you will need to edit your interfaces file under /etc/network for the network setup. NTP should be configured with /etc/ntp.conf and the ntpd daemon.

    April 3, 2016 at 1:25 am #41934

    Ray
    Keymaster

    NTP and static IP are options that are only available on the microcontroller-based OpenSprinkler. On OSPi (OpenSprinkler Pi), these are managed by the Linux system so they are done directly in the Linux system and not part of the firmware.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

OpenSprinkler › Forums › Hardware Questions › OpenSprinkler Pi (OSPi) › Static IP and NTP settings