Firmware 2.2.0(1) official released

Thanks for the update Ray. I just watched the 2.2.0(1) video and I love the new features. Just one question from me, is there a chance that OpenSprinkler PI will have the ability for remote cloud access in the future? Port forwarding is not possible to my home as I have an LTE connection and so the only option is to have Cloud access via OTC. Thanks!

Thanks for this update Ray. Installed with no problem but when importing my old configuration the software hung. This was similar to what I experienced with the test version of 2.2.0. The solution provided by your team is to do a factory rest, then edit out the MQTT line in the backup JSON file, ie “mqtt”:{“en”:1,”host”:”XXX.XXX.XXX.XXX”,”port”:1883,”user”:”XXXXX”,”pass”:”XXXXX”},
Once this was removed the import ran smoothly and I now have 2.2.0(1) up and running.
Thanks for the continued development.

So I updated one of my 3.0 controllers and now it no longer works with my app as wher all of my other controllers do. I use the api calls to set rain delays and backup my settings of all 21 of my active controllers. So I am not sure what has changed. I jave tried /ja and /jc as well. I used Visual Basic and the winsock.ocx.

get /cv?pw=md5password HTTP/1.1/ now returns this.

HTTP/1.1 413 Request too large

The request was too large

This is what I get from FW 2.19
{“settings”:{“devt”:1673968964,”nbrd”:5,”en”:1,”sn1″:0,”sn2″:0,”rd”:1,”rdst”:1673991520,”sunrise”:412,”sunset”:1027,”eip”:2728279905,”lwc”:1673959637,”lswc”:1673959637,”lupt”:1673359597,”lrbtc”:99,”lrun”:[39,1,-15976,1673938021],”mac”:”xxxxxxxxxx”,”loc”:”33.91848,-118.13824″,”jsp”:”https://ui.opensprinkler.com/js”,”wsp”:”weather.opensprinkler.com”,”wto”:{“baseETo”:0.197,”elevation”:600,”key”:””},”ifkey”:””,”mqtt”:{},”wtdata”:{“wp”:”DS”,”eto”:0.053,”radiation”:1.16,”minT”:51,”maxT”:59,”minH”:74,”maxH”:94,”wind”:9.8,”p”:0.97},”wterr”:0,”curr”:0,”sbits”:[0,0,0,0,0,0],”ps”:[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]},”programs”:{“nprogs”:4,”nboards”:5,”mnp”:40,”mnst”:4,”pnsize”:32,”pd”:[[1,127,0,[12293,0,0,0],[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,65535],”Lights Ct 16″],[3,41,0,[1320,3,10,0],[0,0,0,0,0,0,0,0,0,0,0,0,0,0,240,240,0,180,240,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”noche”],[3,45,0,[1170,3,60,0],[240,330,0,60,0,0,300,300,240,360,0,240,240,0,0,0,180,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”nuebo 3x”],[1,91,0,[900,0,180,0],[180,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,120,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”Program 4″]]},”options”:{“fwv”:219,”tz”:16,”ntp”:1,”dhcp”:0,”ip1″:192,”ip2″:168,”ip3″:3,”ip4″:15,”gw1″:192,”gw2″:168,”gw3″:3,”gw4″:1,”hp0″:80,”hp1″:0,”hwv”:23,”ext”:4,”sdt”:0,”mas”:0,”mton”:0,”mtof”:0,”wl”:0,”den”:1,”ipas”:0,”devid”:0,”dim”:50,”uwt”:131,”ntp1″:0,”ntp2″:0,”ntp3″:0,”ntp4″:0,”lg”:1,”mas2″:0,”mton2″:0,”mtof2″:0,”fwm”:9,”fpr0″:100,”fpr1″:0,”re”:0,”dns1″:192,”dns2″:168,”dns3″:3,”dns4″:1,”sar”:0,”ife”:0,”sn1t”:0,”sn1o”:1,”sn1on”:0,”sn1of”:0,”subn1″:255,”subn2″:255,”subn3″:240,”subn4″:0,”wimod”:169,”reset”:0,”dexp”:4,”mexp”:8,”hwt”:172},”status”:{“sn”:[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”nstations”:40},”stations”:{“masop”:[255,255,255,255,255],”masop2″:[0,0,0,0,0],”ignore_rain”:[0,0,0,0,128],”ignore_sn1″:[0,0,0,0,0],”ignore_sn2″:[0,0,0,0,0],”stn_dis”:[0,0,0,0,0],”stn_seq”:[255,255,255,255,127],”stn_spe”:[0,0,0,0,0],”snames”:[“S01″,”S02″,”S03″,”S04″,”S05″,”S06″,”S07″,”S08″,”S09″,”S10″,”S11″,”S12″,”S13″,”S14″,”S15″,”S16″,”S17″,”S18″,”S19″,”S20″,”S21″,”S22″,”S23″,”S24″,”S25″,”S26″,”S27″,”S28″,”S29″,”S30″,”S31″,”S32″,”S33″,”S34″,”S35″,”S36″,”S37″,”S38″,”S39″,”S40 Lights Court 16″],”maxlen”:32}}

In the following, updated or newly introduced JSON variables are highlighted by green color .
3. Get Controller Variables [Keyword /jc]
/jc?pw=xxx

In a browser you would put http://os-ip/ja?pw=

when putting it through a socket you connect and send get /os-ip/ja?pw=md5password

These commands worked up until the new firmware. This same call works on fw2.19 and below. I did not try the 2.2.0 fw, but I installed the 2.2.0(1) and it now returns this

HTTP/1.1 413 Request too large

The request was too large

So something more has changed.

Hi ray,

Thanks for the new firmware, it offers a lot of useful functionalities, I suspect a lot of work went into it!

Just one thing that doesn’t seem to work for me: OTC through Android App.

I am on an internet connection in a remote area. My network provider uses different layers of NAT (Network Address Translation). In the past I have never gotten any Dynamic DNS services or port forwarding working (for Opensprinkler or any other service within my network).

I was hoping OTC for Opensprinkler would work, and it does, BUT ONLY when I access my Opensprinkler remotely through the webinterface on https://ui.opensprinkler.com/

When I try to connect remotely (mobile 4G) through the Android App (2.3.0, firmware 2.2.0(1) HW version 3.2DC) I get an “unable to connect” message.
When I connect remotely through my home Wifi network (using the token). the App does connect to my Opensprinkler flawlessly.

it is not a very big deal for me, although it would be nice to be able to access Opensprinkler out in the field, without having to walk back to my WIFI network;)

*edit: well, actually I can access through the webinterface, so I don’t have to walk back;)*

any suggestions you might have on resolving this are very welcome!

thanks for all the good work!

Hello,

Is it still possible to host the javascript files on a local webserver with this firmware release?
Where exactly are the javascript files please? I’ve not been able to find them again (I imagine they’ve been changed?).

Thank you!

PS: Found instructions at the bottom of this repo’s readme, but the javascript bundle can’t be downloaded any longer: https://github.com/OpenSprinkler/OpenSprinkler-App

The bundle which used to have to be downloaded to be hosted from a local web server to avoid needing to be online to use OSPi.

Anyway, if it has all changed, are there instructions on how to host/run the App component please? I’ve followed the upgrade guide but saw no mention of a separate App component sorry.

I have an OpenSprinkler Pi and wish to host the app with HTTPS/TLS.

Thank you!