OK, here is as much info as I can provide:
settings file:
{“settings”:{“devt”:1566850792,”nbrd”:2,”en”:1,”rd”:0,”rs”:0,”rdst”:0,”loc”:”40.81050,0.45852″,”wtkey”:””,”sunrise”:437,”sunset”:1247,”eip”:1602354689,”lwc”:1566848605,”lswc”:0,”lupt”:1566646945,”lrun”:[2,2,3300,1566712501],”curr”:0,”sbits”:[0,0,0],”ps”:[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]],”wto”:{“baseETo”:0.16,”elevation”:246,”h”:100,”t”:100,”r”:100,”bh”:40,”bt”:69.98,”br”:0},”ifkey”:””,”RSSI”:-65},”programs”:{“nprogs”:2,”nboards”:2,”mnp”:35,”mnst”:4,”pnsize”:16,”pd”:[[113,1,2,[297,-1,-1,-1],[0,0,0,0,0,0,0,0,240,0,0,0,0,0,0,0],”pump start progr”],[115,1,2,[300,-1,-1,-1],[0,0,3000,0,0,0,0,0,0,0,0,0,0,0,0,0],”irri moestuin”]]},”options”:{“fwv”:218,”tz”:56,”ntp”:1,”dhcp”:1,”ip1″:192,”ip2″:168,”ip3″:0,”ip4″:111,”gw1″:192,”gw2″:168,”gw3″:0,”gw4″:1,”hp0″:80,”hp1″:0,”hwv”:30,”ext”:1,”sdt”:0,”mas”:1,”mton”:0,”mtof”:0,”urs”:0,”rso”:0,”wl”:110,”den”:1,”ipas”:0,”bst”:320,”uwt”:3,”ntp1″:50,”ntp2″:97,”ntp3″:210,”ntp4″:169,”lg”:1,”mas2″:2,”mton2″:0,”mtof2″:-20,”fwm”:4,”fpr0″:100,”fpr1″:0,”re”:0,”dns1″:8,”dns2″:8,”dns3″:8,”dns4″:8,”sar”:0,”ife”:0,”sn2t”:0,”sn2o”:0,”reset”:0,”dexp”:0,”mexp”:8,”hwt”:220},”status”:{“sn”:[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”nstations”:16},”stations”:{“masop”:[253,123],”ignore_rain”:[0,0],”masop2″:[4,128],”stn_dis”:[0,0],”stn_seq”:[252,56],”stn_spe”:[4,195],”snames”:[“master 1 pomp”,”master 2 ball valves”,”virtual moestuin”,”S04″,”S05″,”S06″,”S07″,”S08″,”pump start advance”,”pump stop delay”,”S11″,”S12″,”S13″,”S14″,”run pump only”,”Open ball valves only”],”maxlen”:24}}
Firmware 2.1.8 (4)
Hardware version : 3.0 DC
Anything else that might help?
Thanks for your time and attention, so far!!