Hi,
today i have run upgarde from 2.1.7 to 2.1.9
my hardware version is 2.3
after success upgrade there is no web page comes up in the computer browser and my phone too.
I can see the device on my router, the devide is working, I can see data on the screen (of the device)
do you have any idea?
best regards feri
you can see the upgarde process here.:
d:\bb>avrdude.exe -c arduino -p m1284p -P COM5 -U flash:w:os_219.hex
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude.exe: Device signature = 0x1e9705
avrdude.exe: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude.exe: erasing chip
avrdude.exe: reading input file “os_219.hex”
avrdude.exe: input file os_219.hex auto detected as Intel Hex
avrdude.exe: writing flash (79118 bytes):
Writing | ################################################## | 100% 10.45s
avrdude.exe: 79118 bytes of flash written
avrdude.exe: verifying flash memory against os_219.hex:
avrdude.exe: load data flash data from input file os_219.hex:
avrdude.exe: input file os_219.hex auto detected as Intel Hex
avrdude.exe: input file os_219.hex contains 79118 bytes
avrdude.exe: reading on-chip flash data:
Reading | ################################################## | 100% 8.86s
avrdude.exe: verifying …
avrdude.exe: 79118 bytes of flash verified
avrdude.exe: safemode: Fuses OK
avrdude.exe done. Thank you.