Ok I have managed to get 2.0.2 back on the unit thankfully.
However still getting the same issue as before where when starting the unit im getting “A microSD card is required.”
I have tried two different microSD cards (128mb and 2gb) with the files copied locally however still get the same issue when restarting the unit.
If i eject and insert the microSD card at this point it then gets to the NTP Syncing screen however It never gives me a DHCP address and by pressing B1 gives me 0.0.0.0:80.
I have set the ip to 192.168.20.200 with a gw of 192.168.20.1 however it still will not take the static ip and still shows 0.0.0.0:80 in the IP address when pressing B1.
Should the microSD card be formatted with fat32 or something else?
Cheers,
Brett