OpenSprinkler Forums OpenSprinkler Unified Firmware 2.1.6 is the latest, but it will only let me install 2.1.5 (h/w v2.1u)

  • This topic has 3 replies, 2 voices, and was last updated 5 years ago by Ray.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #43840

    TheCase
    Participant

    I’m trying to diagnose a problem where my solenoids aren’t firing (I’ll probably have to open another topic on that later).

    So I’m updating the firmware from 2.1.4 to 2.1.5.

    Once that was successful, I thought I could install 2.1.6. While it says it is the latest version available, it is not available from the selection list during the upgrade.

    Is 2.1u hardware not supported by the latest firmware?

    #43842

    TheCase
    Participant

    Oh – I see the problem – the top option is 2.1.6 but the text of “2.1.6” is not visible in the pulldown like the others.

    If it matters, I’m using the Mac version of the updater program.

    My unit is now updating to 2.1.6

    #43846

    TheCase
    Participant

    Nope – I now see in the 2.1.6 changelog that I can’t update to 2.1.6 over USB.

    Good times.

    #43888

    Ray
    Keymaster

    Hi,

    You are correct that you can’t upgrade OS 2.1 to firmware 2.1.6 through USB any more. This is explained in this support article:
    https://opensprinkler.freshdesk.com/solution/articles/5000668400-updating-opensprinkler-2-1-to-firmware-2-1-6-and-beyond-

    We do provide firmware upgrade service free of charge. Alternatively, we provide discounted price for OS 2.1 owners to upgrade to OS 2.3.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

OpenSprinkler Forums OpenSprinkler Unified Firmware 2.1.6 is the latest, but it will only let me install 2.1.5 (h/w v2.1u)