Log In Register

OpenSprinkler › Forums › Hardware Questions › OpenSprinkler › 3.0 Wifi remote valve control

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 8, 2018 at 9:41 am #52915

    DavidB
    Participant

    I need to control a single remote valve via wifi.
    Can one send valve on/off data via the on-board wifi?

    My thinking to use a 8266 board with relay at the remote valve and hopefully have it available in OS as a “virtual zone”.

    Any insight into achieving this would be appreciated.

    October 13, 2018 at 9:52 pm #52957

    Ray
    Keymaster

    If you use a ESP8266 board with relay, and you know the HTTP command to send to it to turn on / off that relay, you can use OpenSprinkler’s HTTP Station feature — define a zone as HTTP zone, and type in the on/off command, then when this zone is turned on or off, it automatically sends the HTTP command to the remote ESP8266.

    October 17, 2018 at 5:21 am #53000

    DavidB
    Participant

    Thanks Ray

    Makes sense.

    Cheers

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

OpenSprinkler › Forums › Hardware Questions › OpenSprinkler › 3.0 Wifi remote valve control