3D enclosure ospi 2.0

[matthiasp]

hi,
I tried to print the case for a OSPi 2.0, unfortunately those 3d print files are damaged/not usable. can someone pls checks whats wrong?

https://github.com/OpenSprinkler/OpenSprinkler-Hardware/tree/master/OSPi/enclsoure/3Dprint/ospi20

thx

[Ray]

There are two files in the folder:
– the .3mf is for Bambu color printers, it’s meant for multi-color printing
– the .stl is a single color generic 3D file, which all printers should be able to accept.

What’s your evidence the files are damaged/not usable? I just downloaded them and both are fine. In particular, Github can preview the .stl file in 3D – how is the file corrupted if it can preview it in 3D?

[matthiasp]

if I try to open them in Bambulab I receive the message: “Loading of a model file failed” and “the file does not include any geometry data”. I also do not see a preview in 3D in github.

[Ray]

Github has built-in 3D viewer:
https://github.com/OpenSprinkler/OpenSprinkler-Hardware/blob/master/OSPi/enclsoure/3Dprint/ospi20/ospi20_tight.stl
if you can’t see it, maybe your browser doesn’t support it?

Have you tried the stl file? That’s not Bambu specific and should load in all printer software.

Also, make sure you download the raw file. Do NOT use “save link as” as that does not save the correct file. Only use the download raw file link, or do a git clone to retrieve the entire folder.

[matthiasp]

ah, downloading as a raw file did the trick. thanks so much!!

[Author]

Posts