I have installed OSPi image for OpenSprinkler pi on my Rpi rev B.
It’s been working fine all these time until recently I’m not getting any ethernet connectivity on my pi. Checked and seems like I have some issues with the network port (not the pi but the wall port). I’m not able to move the pi as I have outside sprinkler wires coming in and attached to the relay.
I’m just trying to access the OpenSprinkler web interface and change the schedule. It’s very critical and I’d really appreciate any help with this. Is there a file I can edit on the local system to update the schedule? I just need to get this up and running even without network connectivity.
A couple of suggestions: 1) try to restart the OpenSprinkler firmware (sudo /etc/init.d/OpenSprinkler.sh restart) and see if it makes any difference. The firmware is on port 8080 (unless if you accidentally changed the port). 2) do you happen to have a WiFi USB dongle? You can get your RPi online through WiFi and see if it works.
Although the programs are all stored in a local file (called nvm.dat), it’s in binary form and you can’t easily edit it.