Bad SD Card | OpenSprinkler

Log In Register

Tagged: fixed, ospiv1.4

This topic has 1 reply, 1 voice, and was last updated 4 years, 5 months ago by Dave Watson.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
May 6, 2020 at 2:57 pm #65758

Dave Watson
Participant

I’ve had a OSPI Setup for awhile now and my memory card has gone bad. I’m running an old Raspberry Pi 1 Model B with an OSPI V 1.4 (purchased it long go). What version of Raspbian and Unified firmware can I use to revive this thing? Any ideas? I wish I would have backed the card up long ago. 🙁

Thanks.

May 9, 2020 at 8:14 am #65844

Dave Watson
Participant

Never mind — I was able to get this fixed. I was a little intimidated with the process. Here is what I had to do:

1. Use Raspberry PI Imager (https://www.raspberrypi.org/blog/raspberry-pi-imager-imaging-utility/) to place the Raspbian Desktop on a new SD Card.
2. Setup the EDIMax Card to connect to my WIFI.
3. Then followed this configuration: https://openthings.freshdesk.com/support/solutions/articles/5000631599#install

Worked out pretty well.

Thanks
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.