Broken Screen | OpenSprinkler

Log In Register

This topic has 3 replies, 4 voices, and was last updated 5 years, 6 months ago by psmedley.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
January 23, 2019 at 1:17 am #53826
daveholst
Participant
~12 months ago I managed to knock my open sprinkler off the bench which damaged the screen. The unit has been working perfectly fine since, but I was hoping to replace the screen and don’t know where to get one from.

I tried unplugging the screen and putting it back in again. It didn’t help.

Thanks!

Dave.
Attachments:
1. IMG_1772.jpg
February 1, 2019 at 4:25 am #53921

tigercjn
Participant

https://www.aliexpress.com/item/0-96-inch-IIC-Serial-Yellow-Blue-OLED-Display-Module-128X64-I2C-SSD1306-12864-LCD-Screen/32780134267.html?spm=a2g0s.9042311.0.0.27424c4dBAxoEj

less than $5 aud.

I have not tried it yet but have bought a couple to build one.

Cheers
Chris

February 15, 2019 at 9:42 pm #54024

Ray
Keymaster

Echo @tigercjn: you can find SSD1306 IIC (also called I2C) OLED screens on Aliexpress for a few dollars shipping included. Make sure it’s 4 pins (the non-IIC type has 6 or more pins which wouldn’t fit OpenSprinkler 3.0).

March 1, 2019 at 8:30 pm #54131

psmedley
Participant

Thanks guys, the screen on my Opensprinkler Latch has stopped working recently, ordered a replacement from AliExpress.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.