Log In Register

OpenSprinkler › Forums › OpenSprinkler Unified Firmware › Combined Firmware for 2.3AC

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 1, 2015 at 10:50 am #40086

    dbrack1
    Participant

    Ray,

    Will you or Samer post the hex file that contains both the bootloader and code combined for hardware version 2.3AC?

    Thanks

    September 3, 2015 at 10:40 am #40111

    Ray
    Keymaster

    We actually don’t have the combined hex. I’ve attached the bootloader and the scripts to upload the bootloader. This is just the ATmega1284 bootloader downloaded directly from optiboot website. The firmware is flashed through the USB port using the firmware updater program. The two steps are done separately for every board to verify that the USB-serial chip is working and the bootloader is working.

    Attachments:
    1. os23_bootloader.zip
    September 9, 2015 at 9:48 am #40171

    dbrack1
    Participant

    Thanks. I wasn’t sure if it was just the standard optiboot bootloader.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

OpenSprinkler › Forums › OpenSprinkler Unified Firmware › Combined Firmware for 2.3AC