Feed Local Weatherservice from Meteobridge

[bekesizl]

In case somebody is trying to feed a Local Weatherservice (e.g. on a Raspberry Pi) from a Meteobridge (in my case on another Raspberry Pi), here is the string to add to a HTTP event definition as depicted on the attached picture.
I was looking for this settings, but was unable to find them.

Note: Rain formula needs to be tested, but there is no syntax error showed on either side.

http://192.168.1.25:80/weatherstation/updateweatherstation.php?tempf=%5Bth0temp-act=F.0:0%5D&humidity=%5Bth0hum-act.0:–%5D&rainin=%5Brain0total-sum1=inch.1:–%5D&dailytainin=%5Brain0total-sumday=inch.1:–%5D&dateutc=now

Attachments:

1. 

   meteobridge_opensprinkler_weather_service_feeder.png
   

[Ray]

Good to know. Thanks for sharing!

[bekesizl]

Here is the code, that actually works.

There was a typo at https://github.com/OpenSprinkler/OpenSprinkler-Weather/blob/master/docs/pws-protocol.md

`http://192.168.1.25:80/weatherstation/updateweatherstation.php?tempf=[th0temp-act=F.1:0]&humidity=[th0hum-act.0:–]&rainin=[rain0total-sum1=inch.2:0]&dailyrainin=[rain0total-sumday=inch.2:0]&dateutc=[UYYYY]-[UMM]-[UDD]+[Uhh]%3A[Umm]%3A[Uss]

[Author]

Posts