Log In Register

OpenSprinkler › Forums › OpenSprinkler Mobile and Web App › First Setup, Gets IP, Gets NTP, Can't Access Web on 80

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 26, 2015 at 7:14 pm #40361

    austinguy
    Participant

    I’m using a TP-Link 702n Nano in client mode. The 702n gets an IP of 192.168.1.132 and using dhcp on the router opensprinkler gets 192.168.1.246. I cannot connect to the opensprinkler web interface at all. Anyone else have this problem / find a solution?

    September 28, 2015 at 9:13 am #40377

    Ray
    Keymaster

    First, make sure the computer / mobile device you are using to access OpenSprinkler is on the same WiFi network as the nano router / OpenSprinkler.

    Second, open a browser, and type in http://192.168.1.246/jo do you get any return? Assume your OpenSprinkler’s IP is 192.168.1.246 (if you are not sure, click button B1 on OpenSprinkler will display the IP).

    September 28, 2015 at 12:45 pm #40388

    austinguy
    Participant

    Turns out it was a broadcast filtering issue on the access points. Once disabled, all is well!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

OpenSprinkler › Forums › OpenSprinkler Mobile and Web App › First Setup, Gets IP, Gets NTP, Can't Access Web on 80