Getting started, hardware needed

[john_es]

I have an existing sprinkler system installed… 7 zones, hunter pro c powering it.

I ust came across this project and was going to buy OpenSprinkler v2.1s (assembled), but I am trying to find out how this physically integrates… and if I need to buy any additional hardware, than just the assembled unit.

Many thanks,
John

[Ray]

OpenSprinkler 2.1 is designed to be a drop-in replacement of your existing sprinkler controller. The package includes the sprinkler controller with terminal blocks. What you need additionally are:
– 24V AC transformer (you can reuse your existing hunter transformer)
– Sprinkler valves (which you already have since you have an existing sprinkler setup)
– Option to connect OpenSprinkler to your router (any of the choices below):

• Ethernet cable is the simplest (connect OpenSprinkler directly to your router)[/*:356g50s5]
• Or a pair of powerline network adapter, which creates a local network by making use of your powerline (http://www.amazon.com/TP-LINK-TL-PA2010KIT-Powerline-Adapter-Starter/dp/B00AWRUIY4)[/*:356g50s5]
• Or a WiFi adapter which can link to OpenSprinkler and talk to your router wirelessly (http://www.amazon.com/TP-LINK-TL-WR702N-Wireless-Repeater-150Mpbs/dp/B007PTCFFW).[/*:356g50s5]

Additional information can be found on the product webpage: http://rayshobby.net/cart/os
Thanks.

[john_es]

Yeah……… this was amazingly easy to get installed!

[Author]

Posts