- This topic has 3 replies, 2 voices, and was last updated 1 year, 3 months ago by
.
-
Posts
-
I have issue with station0, I set group for P, when I start it manually fo specific time it change to zone M (254) after station stops. Same for B it change to A, seems like its been decremeted by 1, but for example groups A,C holds in place. Other stations are ok. Any ideas?
Hi, this is a known bug in older firmwares (specifically, on OpenSprinkler 2.3, when setting Zone 1 to a group that’s not the default group A). You should update your firmware to the latest (2.2.1(1)) and that should fix the issue.
Thnaks for the reply, I’m currently on 2.2.1, will try to update soon, so far the workaround is to set it to group C
This issue is only address in the latest firmware 2.2.1(1) (i.e. minor revision(1)). It was still in 2.2.1(0), which is probably what you have right now. Upgrading to 2.2.1(1) should be quite easy — because this is a minor revision change, your settings are all preserved and you don’t need to export/import configurations.
- You must be logged in to reply to this topic.