Is there a bottom part for this enclosure

[skipt]

Hi all,

I got a couple of enclosures from JLCPCB based on this model (https://github.com/OpenSprinkler/OpenSprinkler-Hardware/blob/master/OSPi/enclsoure/3Dprint/OSPi152.stl). Does anyone have the model file for a bottom cover?
Or is the subassembly supposed to be directly attached to a non-conductive surface? (I have a bigger enclosure for
the entire assembly and the zone expansion board).

Thanks,
-Skip

[Ray]

I didn’t design the bottom part. The top enclosure is designed to be mountable alone, without a back panel. I noticed that our German distributor has their own design which has both the top and bottom parts:
https://opensprinklershop.de/en/product/ospi-gehaeuse/
not sure if the 3D files are publicly available but you can send a query to them if you want to find out.

[skipt]

That looks very nice! Thanks for the link.

I did a quick-and-dirty model (my first ever) and printed it on an Enter3. It’s ok. Here’s the link
in case its useful to anyone.

https://www.tinkercad.com/things/jObwS9nGOBJ-fabulous-wolt/edit?sharecode=QiJNbX9vAKs5PyzorMhiJPDwwtx45R_kpyNYsvemYzA

[Author]

Posts