Log, Month Graph, shows into the future?

[automate]

I may be interpreting this all wrong so set me straight;

When I go into the log, then click graph and month, the bar graph shows me dates in February and March. I did not have this online last year and we are only starting February. My dates at the bottom are start; 1/27/2015 end; 2/3/2015. How is it showing what hasn’t occurred yet?

[Samer]

Do you mind attaching a screenshot? The way the graph works is an empty placeholder is made for every zone and therefore plotted bars get moved over based on the number of zones.

Does the timeline or table view echo the wrong dates?

[automate]

[Samer]

Does the timeline or table view echo the wrong time/dates?

Just want to make sure this is a visual error and not an error in the actual date/time.

Thanks!

[automate]

I’m not sure exactly what you wanted to see, I hope this helps.

 

 

 

[Samer]

Okay, I will look into this but it’s basically an issue with the flot library and probably the way i’m loading the data into the library. I will look and see what’s going on but as you can see in the “table” view the data is correctly labeled as January and February (instead of February and March). I will post back once I have some more information or a fix.

Thanks!

[automate]

In the last picture I posted, “graph”, there is a straight blue line running left to right at 17 minutes, what is that telling me?

[Samer]

The right side of the graph has a second y-axis labeled “% Water” This represents the day’s watering percentage which is particularly useful if you are using an automatic weather adjustment. This will scale your watering each day to the weather conditions and this lets you correlate the two (run time and watering percentage).

Hope that helps!

[automate]

Does it make sense that it would be a steady 42% percent since the 20th? I am using wunderground / zimmerman. I think it was about then that I put the last firmware on it.

[Samer]

It depends on your current weather conditions. However, if the weather adjustments got switched off, the watering percentage would stay where it last was.

You can use the “Weather Diagnostics” from the side panel to check your current weather conditions and current watering percentage.

[automate]

Weather diagnostics shows current conditions and 42% watering.

Wow, one thing leads to another. I do not have it in manual, My weather station history shows temperature variation and rain for several days when the water percentage was stuck at 42%. I just changed it to manual and put 50% in the box, saved it, then put it back to automatic. The percentage in the box is greyed out but stayed at 50%. I rechecked the location and it is correct for where I live but funny thing I noticed the time is 3 hours ahead, whats with that? location, time zone is correct, NTP sync is checked, but time is wrong.

[Samer]

Would you mind letting me know the location so I may troubleshoot why the time is incorrect for your location?

Thanks.

[automate]

San Bernardino, California  92410

[automate]

I believe I found out what was causing all the havoc. When I updated to 2.1.2 I imported my configuration file from 2.1.1, that may be what was causing all the errors.

I first tried to default the controller, that didn’t help so I re-installed 2.1.2. Then manually added all the settings and programs. It all seems to be ALMOST ok, time is correct, weather correction percentage is working. The log still shows that there were operations that occurred in months that have not been yet, (see first picture in this thread).

[Author]

Posts