OpenSprinkler Forums Pictures and Creative Use Manual Station Run – APi Call Not working

  • This topic has 1 reply, 2 voices, and was last updated 8 years ago by Ray.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #42723

    thambisree
    Participant

    Hi

    I am planning to run Manual Station Run as followS:

    /cm?pw=xxx&sid=x&en=x&t=x

    my command :
    http://10.0.0.2:8000/cm?pw=mypasswd&sid=5&en=1&t=2

    the above command brings login screen

    All other commands works : http://10.0.0.2:8000/js?pw=mypasswd and http://10.0.0.2:8000/jp?pw=mypasswd

    My setup is OpenSprinkler Pi with raspberryPi 2 and open sprinkler software version 3.1.46 (2016-04-30).

    Please let me now how to fix this, this will help to run the manual mode using Amazon Echo

    Thanks
    thambi

    #42735

    Ray
    Keymaster

    Are you running the OpenSprinkler Unified Firmware? From your version number (3.1.46) it looks like you are running a third-party firmware (the OpenSprinkler Unified Firmware is currently at 2.1.6). The manual command is part of the unified firmware feature. Third-party firmware may also support it but I don’t know for sure.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

OpenSprinkler Forums Pictures and Creative Use Manual Station Run – APi Call Not working