Log In Register

OpenSprinkler › Forums › Hardware Questions › Master stations not working

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 23, 2015 at 12:42 pm #37896

    joelg
    Participant

    I have just updated my firmware to 2.1.3 and i can not get the master stations to work. I set station 1 as a master, when station 2 comes on it also shows the master is running on the LCD but there is no power at the connection terminal for station 1, the same thing happens if i set station 1 as master 2. If i set station 1 as a regular zone, it runs fine.

    Any ideas?

    May 23, 2015 at 10:04 pm #37897

    Ray
    Keymaster

    Hmm, this is not a known problem (especially since the LCD shows master station is on). Note that the latest firmware is 2.1.4, which has been available since a few weeks ago.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

OpenSprinkler › Forums › Hardware Questions › Master stations not working