OpenSprinkler Forums Hardware Questions OpenSprinkler OpenSprinkler 3.0 A/C. Won't power up.

This topic contains 1 reply, has 1 voice, and was last updated by  [email protected] 6 days, 2 hours ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #60390

    [email protected]
    Participant

    OpenSprinkler 3.0 A/C. Bought it last fall but just barely plugged it in with two expansion boards. I was trouble shooting the second expansion board(nothing plugged into it would turn on), after moving some wires around I looked down and the LCD was off. I’ve tried different outlets and checking to make sure the cable is tight. Is there anything else I should check for?

    #60391

    [email protected]
    Participant

    Looks like it may just be my power adapter. Volt meter not registering anything. I’ll get an other one and give it an other try.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

OpenSprinkler Forums Hardware Questions OpenSprinkler OpenSprinkler 3.0 A/C. Won't power up.